This SpeedyBee Stack has an F7 V2 FC + 45A 4-in-1 ESC, which is SpeedyBee’s latest flagship ESC. Equipped with BLHeli_32 firmware and 21 filtering capacitors! With a continuous current of 45A and VBAT power output, it is sure to bring your build to top performance! The F7 V2 FC is the world’s first FC with wireless firmware flasher and black-box analysis. Set motor directions wirelessly with built-in Wifi/Bluetooth capabilities!
Features
- World’s first Buzzer BZ+ and BZ- pad used for 5V Buzzer flashing, and Blackbox analysis.
- Support Flight Controller Firmware BetaFlight(Default), EMUFlight
- SmartPort Use any TX pad of UART for the SmartPort feature.
- BLE Support, used for Flight Controller configuration
- DJI Air Unit slot A full DJI Air Unit JST slot onboard
- WiFi Support, used for data transfer, e.g firmware
- Boot button Used to easy enter DFU mode
- RSSI input RSSI input solder pad
- LED pin Used for WS2812 LED
- Wifi/Bluetooth Capabilities
Specifications
F7 V2 FC
- Power input: 3S – 6S Lipo
- 5V power output: 7 * 5V output, 6 pads, and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1, the maximum load current is 2.5A.
- 9V power output 2 * 9V output, 1 pad, and another one used for DJI slot
- 4.5V power output 1 * 4.5V output pad
- 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
- UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
- I2C: Used for external Magnetometer, Sonar, etc.
- Mounting :30.5 x 30.5mm, 4mm hole size
- OSD: BetaFlight OSD w/ AT7456E chip
- BetaFlight Camera Control Pad: Yes
- BlackBox: 16MB onboard data flash
- Current Sensor: 1: 10 (Scale 168)
- ESC Telemetry: UART UART4 RX
- Target Name: SPEEDYBEEF7V2
- Dimension 41 x 38 x 6.9mm
- ESC signal: M1 – M4
- Baro: BMP280 (I2C)
- MCU: STM32F722
- IMU: MPU6000
- USB: Type-C
- Weight: 9g
45A 4-in-1 ESC
- Mounting 30.5 x 30.5mm, 4mm hole size
- Current Sensor Support (Scale 168)
- Firmware BLHeli32 SpeedyBee 4in1
- ESC Protocol DSHOT300/600/1200
- Continuous Current 45A * 4
- Dimension 41 * 45 * 6.5mm
- Power input 3S – 6S LiPo
- ESC Telemetry Support
- Burst Current 55A(10S)
- Power output VBAT
- MCU STM32F051
- Weight 12.5g
Includes
- 1x SpeedyBee F7 V2 FC + 45A ESC Stack w/ Bluetooth + WiFi
- 5x M3 6.6mm Antivibration Silicone Grommets
- 5x M3 8mm Antivibration Silicone Grommets
- 5x M3 30mm Inner-Hexagon Screws
- 1x JST 8PIN Cable (15mm)
- 1x DJI 6PIN Cabel (80mm)
- 1x 35V 470uf Capacitor
- 5x M3 Silicone O Rings
- 1x XT60 Power Cable
- 5x M3 Nylon Nuts
Reviews
There are no reviews yet.